Remember that you can customise our products to suit your needs – simply and quickly. If you like our furniture, but the dimensions or colour do not fit your interior, just contact us. After discussing the details, we will prepare a rough drawing of the necessary changes with the project quotation and due date. Everything will take place by e-mail or telephone. If you are happy with the changes, we will get to work.
Customisation includes:
- dyeing (you can choose the dye colour from among 12 shades of oil-waxes featured in our offer, or the natural colour of birch plywood protected with a colourless wax oil. Furniture does not have to be in one colour, the final look depends on your imagination)
- dimensions (each dimension can be adapted to your interior while maintaining an original design)
- functional layout (if you need to change the functional layout of your furniture, e.g. you would like more drawers or shelves or to change the front opening side, we will help you adjust it to your individual needs).
We invite you to contact us.
Dyeing
Plywood
All furniture is made from birch plywood class I/II according to standard PN-EN 635-2
CLASS I
Classification by characteristic features of wood allows for::
- Pin knots – allowed up to 3pcs/m2 with a diameter of up to 3mm
- Healthy overgrown knots – up to a single diameter of 15mm is allowed, provided that their total diameter does not exceed 30mm/m2; knots may have minor cracks
- Rotted and non-stuck knots and knot holes – a unit diameter of 6 mm is allowed, if it is filled and up to 2 pcs/m2
- Open cracks – allowed if smaller than 1/10 of the board length, up to a unit width of 3 mm, up to 3 pcs/running metre if they are filled
- Closed cracks
- Plywood defects
- Discoloration that does not damage the wood – a slight variation in the natural colour of the wood is allowed
Classification by manufacturing process defects allows for:
- Repairs, including: patches, inserts, wedges – allowed if they are made correctly and filled tightly, up to 3 items/m2
- Damage to the board edge caused by grinding or sawing – allowed up to 5 mm from the board edge
CLASS II
Classification by characteristic features of wood allows for:
- Pin knots
- Healthy overgrown knots – up to a single diameter of 35 mm is allowed; knots may have minor cracks
- Rotted and non-stuck knots and knot holes – up to a unit diameter of 5mm is allowed, if it is not repaired; 10mm, if filled and up to 3/m2
- Open cracks – allowed if they are smaller than 1/5 of the board length, up to the unit width of 5 mm, up to 3 pcs/running metre
- Closed cracks
- Bark pockets – up to 5 mm wide is allowed if filled properly
- Plywood defects
- Discoloration that does not damage the wood – a slight variation in the natural colour of the wood is allowed
Classification by manufacturing process defects allows for:
- Overlaps – allowed up to 1 pc/m2 and up to 100 mm long
- Glue puncture – small and sporadic allowed
- Repairs, including patches, inserts, wedges – allowed if they are performed properly and filled tightly, up to 6 pcs/m2
- Repairs – synthetic filling allowed within the category that suits it best
- Damage to the board edge caused by grinding or sawing – allowed up to 5 mm from the board edge.
- Depressions, prints and bulges – minor and sporadic allowed
Templates
If you would like to see our material in real life to check if it will be a good fit for your interior, we can send you a set of samples in selected finishes. Just send us an email via the contact form with a list of colours or place an order via our store.
